Best fish finder can provide you with a pretty good discernment of where to find the fish, the structure, and terrain, the depth, what could be under the kayak and in general what is in the water. There are different ways to mount a fish finder on a kayak some work well other come with their set of issues. It is easy to install a fish finder in a kayak than in a real boat. They vary in different sizes and the huge range of features. The easiest way to install a fish finder is in Hull fish finder way. The best fish finder comes with a high-end resolution color screen, latest side imaging technology, down imaging a standard 2D. The following is a step by step description of how to mount a fish finder on a kayak.
- Step 1: The first and foremost step is positioning your fish finder in the desired place. Make sure it doesn’t get in the way of the kayak compartment areas, your paddles or your feet. The best place for it be placed should be between the foot wheel and behind the hatch an area that is submerged, a place where it won’t get bumped around, and a place that should be within your reach. The area should be smooth and quite a distance from the propeller.
- Step 2: The second step is to apply the fish finder cable. Place the mounting base and mark the bolt hole where the fish finder will be mounted. Then position the cable at the center where you’ve marked the four bolts. Chart out the fish finder using a sharpie to recognize the screws easily.
- Step 3: Drill two holes on each side for the fish finder cable. Before you turn the fish finder transducer, it is important to run a test of the wires. Run the wires from the fish finder to the main unit up to the battery. Running a test is significant to avoid tug incidents on the wire that may loosen the tightening sealant. Attach the wire securely and expose the wire power cable. Connect the power cable from upward to under the kayak and connect the cable running through the holes from the underside.
- Step 4: Mount the transducer bolts by making holes. To prevent entry of saltwater place a substantial amount of goop in the holes. Mount the transducer horizontally over the block by applying block epoxy or some high-quality glue. Colligate the untainted steel bolts of the mounting base by utilizing a stainless aircraft nuts and a fender washer by the Kayak hull. Tighten it with a box wrench.
- Step 5: Run the wires by attaching the plug head and connecting the retaining clip. Then attach the screws firmly from the plug head to the mounting base. Secure the hole with some goop and turnover the mounting head forward. Install the cables from the power source all the way to the central unit. Lower the cable in a circular motion slowly while securing it to eliminate any formed bubbles.
- Step 6: Once you attach the wires, secure the transducer and mount the fish finder. Ensure the transducer cables are secured by locking the wood piece between the cable and the hull top. Most fish finder comes with a manual of fixing it correctly.
- Step 7: Finally, purchase a battery and insert in some connector to the power cable. Don’t forget to match the colors on the wire cutters, fix the battery into the wires based on the coding of the color. Put the battery in a dry sealant. Once you’ve followed all the steps above its time to set off for a great fishing trip.
It is significant to note that before you mount the fish finder on the kayak read and understand the instructions of the manufacturer. If you swing a regular fish finder over the side, it will reduce the life expectancy of your instrument. To have a good reading install your fish finder correctly and ensure small rocks cannot damage it underneath the water. Without proper installation, you will not be able to see clear images from your fish finder and it may work against you from identifying the fish. Avoid overhead mounting locations and enjoy your fishing more effectively!